Note: Beta65pro Frsky & DSMX & FUTABA & Flysky& NO RX Version are now AVAILABLE. Coming back with F4 Brushless FC, F4 1S No RX Brushless FC and Z02 (Wire-Connected Version 25 degree)
If you are using EU-LBT firmware radio controller, you might find that you can’t bind successfully to Beta65pro. Here are the solutions we provide for you. Thanks to Sebastian Abramowski for giving us the important feedback about binding to EU-LBT firmware radio controller.
|Frsky Version||DSMX Version||Flysky Version||FUTABA Version||No RX Version|
|FC||F4 Brushless FC||F4 No RX FC||F4 No RX FC||F4 Brushless FC||F4 No RX FC|
|RX||SPI Frsky RX||Fullspeed RX||Flysky RX||SPI FUTABA RX||None|
This is the more tiny 1S brushless drone with 0603 motors, and 65mm frame.
Tip: DSMX rx version is NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module.
The 0603 motors that come with 65pro are the newest version with 19000KV.
|0603 Model||Wire Color||Version||Welding|
|16000KV||Yellow & Red & Black||Upgraded||Bottom ring and shaft are welded together|
|19000KV||Red (CW) & Black (CCW)||Latest||E-clip|
About how to create a Model Profile on your Taranis Q X7 for the BetaFPV Beta65 Pro. You will learn how to set your Arm switch and mode switch. Thanks for C Ray Tech great work.
Flexible props protector guard included as show below.
The combo of 0703 motors with 75mm frame and 40mm 4-blades propellers has the best efficiency and could provide a great improvement in power. Really not recommend the 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, recommend the 0603 motors.
Here is the testing result of different motors and frames combo.
- Throttle value means the position when the drone hovers in the air.
- Flying time is the time from OSD voltage value 4.3V->2.8V.
- All tested with 4-blades props. 31mm props or 40mm props.
- All throttle values are tested on full charged 260mAh batteries.
- Frame Wheelbase: 65mm
- Propeller: 31mm 4-blades propellers
- Motors: 0603 19000KV
- Fligh Controller: BETAFPV F4 1S Frky Brushless FC / F4 No RX Brushless FC
- Firmware version: betaflight_matekf411rx_3.5.0
- ESC: 5A BLHeli ESC (integrated with FC)
- Camera & VTX: Z02 AIO Camera 5.8G VTX (Wire Connected Version 25 degree)
- Battery: 260mAh Lipo HV Battery
- Receiver: Built in SPI Frsky receiver (D8 & D16) / SPI Futaba receiver / Flysky receiver / Fullspeed DSMX receiver
- Weight: 23.29g (without battery)
- Flight time: 2 minutes with 260mAh HV battery
Note: The updated 65pro can support both D8 & D16. Plus, please flash to the newest version Betaflight_3.5.0
Click here to get the Cli Dump of Beta65pro with F4 Brushless FC on the BETAFPV Support Freshdesk.
If you occur the issue of motor not spin up properly, go to BETAFPV Support Freshdesk for Troubleshooting – Motor Doesn’t Spin.
This DSMX receiver is NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module. For some Spektrum radio transmitter like DX6i/DX6e etc, the DSMX receiver may have a horrible range with your radio transmitter, please change the mode to DSM2 (DSMX in default). This issue is figured out by Micro Motor Warehouse.
- 1 * Beta65 Pro 1S BNF brushless quadcopter
- 1 * 260mAh 1S Lipo HV battery