200 KVM BUTIK
 1-3 DAGARS LEVERANSTID
 ENDAST 69 KR I FRAKT
 FRAKTFRITT ÖVER 1500 KR!

Få personlig och kunnig service både i vår fysiska butik och på nätet.

Skåne hobbys hobbybutik i Skåne
TBS UNIFY PRO32 HV (MMCX)

TBS UNIFY PRO32 HV (MMCX)

629.00 kr

4 i lager

Artikelnr: 425685 Kategori:

New and 6S capable version, with 5V output for your FPV camera. Fully SmartAudio compatible – additional features include TBS CleanSwitch and TBS PitMode.Antenna Connector: MMCX

The most popular, most powerful video transmitter on the market just got a “bigger” brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that youll always meet the race requirements, while giving you the best possible picture.

With only 7g and a 31x22x6mm form factor, your quad will barely notice its there. The 25mW – 1W adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*).

PITMODE – MADE TO RACE
Zero interference even while powered up, its now a possibility! If youve ever repaired a quad during a race, youll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mWs), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! Youve got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels.

SMARTAUDIO – FULL CONTROL
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit … jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

CLEANSWITCH – NEIGHBOR FRIENDLY
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly … thats how we like it at TBS 🙂

SAY NO! TO DIPSWITCHES
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on peoples channels by mistake, or a mismatch between your goggle and video transmitter frequencies.

SPECIFICATIONS

  • Operating Voltage: 2S – 6S
  • Supply current: up to 600mA
  • Operating Temperature: watch for normal airflow
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Impedance: 75 Ohm
  • Weight: 4.4g (PCB Only)
  • Input Connector: JST GH 5pin
  • Antenna Connector: MMCX
  • Video Format: NTSC/PAL
  • Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 30dBm (1W*)
  • Size: 31 x 23 x 5 (mm)

INCLUDED

  • TBS Unify Pro 5G8 HV SE (MMCX)
  • Video Transmitter / Camera / Power cable
  • TBS UNIFY Pro Manual
  • TBS SmartAudio specifications

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

Inga passande produkter finns för denna produkt

Recensioner

Det finns inga recensioner ännu

Bli den första att skriva en recension

*

Skåne Hobby AB
Flädie kyrkväg 2
237 91 Bjärred
Tel: 046 - 247 114

info@skanehobby.se

Om Skånehobby

Skånehobby har en fysisk butik i närheten av Bjärred i Skåne. Vi erbjuder personlig och kunnig service både i vår fysiska butik som på nätet. Välkommen som kund!

Öppettider butiken

Måndag: Stängt
Tisdag: 12.00-18.00
Onsdag: 12.00-18.00
Torsdagar: 12.00-18.00
Fredag : 12.00-15.00
Lördag: 11.00-13.00
Söndag: Stängt



Top